                       DXsoft Switcher 2.10

 DXsoft Switcher is a simple software to handle devices connected to
 an LPT-port.

 The "1" button erects a logical one at pin 2 of an LPT-port,
 the "2" button sets high level at pin 3 and so on.

 The program can be launched with several command line parameters.

 An /LPTn parameter defines used LPT-port (/LPT1 , /LPT2 or /LPT3).
 LPT1 is used by default.
 
 An /LPTxNNNN parameter defines LPT-port with non-standard base address
 (for example, LPT-port at PCI-card). There NNNN is hexadecimal base 
 address of a port, 'x' is just letter 'x', not number, for example
 /LPTxE080

 An /M parameter enables to switch on several switches at one time.

 An /Sx parameter define a switch switched on at the program start
 (/S1 ... /S8). /S0 means "all switches are off". To switch on several
 switches use several /Sx commands.

 An /Ttext parameter defines a title of program window.

 An /B1text ... /B8text parameters define text on button 1...8 respectively.

 An /Ontop parameter puts Switcher in front of all windows.

 An /EX parameter means "to set switches and close program".

 There are examples of command line:

    "C:\Program Files\Switcher\Switcher.exe" /LPT2 /Ontop
    "C:\Program Files\Switcher\Switcher.exe" /LPT1 /M /S3 /S5 /Ontop
    "C:\Program Files\Switcher\Switcher.exe" /LPTxE000 /S0 /EX
    "C:\Program Files\Switcher\Switcher.exe" /LPT1 /TMy Antennas /B1dp /B2lw /Ontop
    "C:\Program Files\Switcher\Switcher.exe" /LPT1 /TAntenna rotor /B100 /B245 /B390 /B4135 /B5180 /B6225 /B7270 /B8315 /Ontop

 The program is free of charge.

 See our another freeware and shareware for amateur radio at
 http://www.dxsoft.com or http://www.hamport.com

 Sergei Podstrigailo,
 UA9OV,  sp@dxsoft.com





